Even thou it is not mentioned here before, you might already know:
there exists an standalone Webbrowser for the RR-net
http://noname.c64.org/csdb/release/?id=30400
Its based on httpload (from DocBacardi) and its written by soci/singular Crew

The only problem is: I can't get it working.... ( no, even )

anyone in here (doc?) getting this really good looking tool working?

masterhit

31.03.06:
It seems that DNS disolving is not working.
If you enter the IP Adress it works.

Haven't tried it myself yet. But if it works with the IP there's clearly a problem with the DNS resolving. Do you have a firewall or something else that may be blocking it (UDP) ?

what do i have to do to get it working?? is there any kind of server that must be running on PC-side?? i am not that much in networking...
I have connected c64 and pc via RR-Net and have TFR running (Codenet, Netdrive) which is working ok.

hi hannenz,
to use this tool you have to have the following network settings:

netmak: 192.168.0.*
dns and gate at 192.168.0.1


if your network does not fit in this needs, you have to assamble the code yourself with your configuration-
--
no pc or anything else needed. its a standalone browser.
---

no pc needed? so... where do i plug the other end of the cable...???!
excuse me if i am asking stupid but i really don't know what to do...!

You plug the other end of the cable into your network hub.

Sorry for bringing up an old subject. But, how can I edit the code to use a different dns/gate and netmask?

If the binary is not packed, simply use a hex-editor or monitor and do a search-and-replace on 192.168.0.1 .. well.. you will have to rearrange the order of the numbers of course.