i hope so
at least it works on all red boards, that's for sure (but i think it should work on all!)
| retrohackers.org https://www.retrohackers.org/ |
|
| RR 3.8b NTSC https://www.retrohackers.org/viewtopic.php?f=4&t=39 |
Page 1 of 1 |
| Author: | hannenz [ Mon Jan 16, 2006 9:07 pm ] |
| Post subject: | RR 3.8b NTSC |
did anyone of you NTSC-users encounter the following problem with the 3.8b ROM (NTSC): When typing TOOL to save the FlashUtil, the Computer hangs up in an endless loop never fininshing writing to disk... I cannot test with a real NTSC machine - only with Vice in NTSC Emulation. |
|
| Author: | groepaz [ Mon Jan 16, 2006 9:23 pm ] |
| Post subject: | |
*afaik* the broken saver in the ntsc version is a known bug. (however, i wouldnt trust vice at all when it comes to ntsc) |
|
| Author: | hannenz [ Mon Jan 16, 2006 9:54 pm ] |
| Post subject: | |
ok, but so it is most likely a bug... that's waht i needed to know - thanks. |
|
| Author: | 65coupei6 [ Mon Jan 16, 2006 10:23 pm ] |
| Post subject: | |
Yes, that is a bug. From what I heard it should hopefully be fixed soon. If you need the current flash program you can download it from my site. Unless it is on this one. |
|
| Author: | RaveGuru [ Tue Jan 17, 2006 12:23 pm ] |
| Post subject: | |
Hmm.. Just to clearify things: The old FlashUtility v0.05 works on all except the red board, right? And if I understand it correctly the latest Hannenz patched 3.8 works with all boards? |
|
| Author: | hannenz [ Tue Jan 17, 2006 1:25 pm ] |
| Post subject: | |
i hope so
at least it works on all red boards, that's for sure (but i think it should work on all!) |
|
| Author: | Xiny6581 [ Tue Jan 17, 2006 3:13 pm ] |
| Post subject: | |
That's what I figured out too 
Got my red shine flashed after some rounds in the ring. |
|
| Author: | Xiny6581 [ Tue Jan 17, 2006 3:14 pm ] |
| Post subject: | |
That's what I figured out too
Got my red shine flashed after some rounds in the ring. |
|
| Author: | 65coupei6 [ Tue Jan 17, 2006 8:44 pm ] |
| Post subject: | |
The red board can only use the 3.8. But, the 3.8patched version does not work for me. I had to use the original 3.8. With Bank 1 empty it shows a garbled header and will not clear the bank. |
|
| Author: | RaveGuru [ Wed Jan 18, 2006 1:03 am ] |
| Post subject: | |
On what board could you not use the 3.8P (patched) ? |
|
| Author: | 65coupei6 [ Wed Jan 18, 2006 1:59 am ] |
| Post subject: | |
Red Board. |
|
| Author: | hannenz [ Wed Jan 18, 2006 8:30 pm ] |
| Post subject: | |
Huh?! The 3.8P's FlahUtility was patched by me to EXPLICITLY work on the red- board-RRs! And it works fine with mine. @65coupie6: what problem do you have with the FlashUtility 3.8P??? EDIT: Just tested: * loaded FlashUtility 3.8P & run * cleared Bank 1 * (Re-)Flashed it with RR3.8P-ROM everything ok with my red board! |
|
| Author: | 65coupei6 [ Wed Jan 18, 2006 9:32 pm ] |
| Post subject: | |
I will try it again and see what happens. This is with a new board not flashed with anyting on Bank 1. I have to flash all the ones I have to the NTSC ROM before I sell them so I will see what happens. EDIT: Ok I tried it on a few other boards and it works fine. It might have just been that board or maybe me (Most likely it was me )
So when is someone going to work on a patched 3.8b NTSC ROM
|
|
| Author: | hannenz [ Thu Jan 19, 2006 5:27 pm ] |
| Post subject: | |
thanx for re-checking! I am glad that there is no mistake in the 3.8P ROM! I wanted to do a patched NTSC-ROM 3.8P, but (this is why i started this thread) there IS a bug in the Saver (that saves the FlashUtility to Disk by TOOL), which I cannot fix. I had contact with Count0 and he said this will be fixed with the next update, whenever that will be. You'll have to use the FlashUtility 3.8P as stand alone so long... |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|